Purpose of this instruction is to establish a standard procedure for the preventive maintenance of Cold Store Unit. This will also serve as guideline for newly hired employees in the maintenance company which will be dealing with this type of air conditioning / refrigeration unit. It is the responsibility of the air conditioning technician to… Read More »
Below is the precise procedure in simple steps, for filling new battery with electrolyte. a) Ensure the area is well ventilated. b) Lift new battery out of box and place on 2 blocks of wood or board. c) Remove the temporary caps from the new battery. d) Wear appropriate PPE, i.e. face visor, chemical apron… Read More »
The purpose of this air conditioner repair and maintenance procedure is to establish a standard PM procedure for the preventive maintenance of Window Type Air-conditioning Units. This will also serve as guideline for newly hired employee in the maintenance or facility management company which will be dealing and doing the maintenance of window type AC… Read More »
In this article we shall get familiarization about the concept of Condition Based Maintenance (CBM). This approach is part of total predictive maintenance. The CBM Philosophy focuses utilizing the Condition Monitoring technologies to predict the failure patterns of an asset. This will allow maintenance department to scheduled the activities based on equipment condition and not… Read More »
Applying the six sigma in maintenance management has become very common. Good companies develop systematic processes that use the lean maintenance approach to get answers to following questions: How much maintenance is needed? What size maintenance crews must be used? Can maintenance be sub-contracted? Should maintenance staff be covered by wage incentive schemes? Can effective… Read More »
Maintenance is activity or work that is carried out and necessary to preserve an asset including building and equipment’s. Maintenance work enables continued use and function, above a minimum acceptable level of performance, over its design service life, without unforeseen renewal or major repair activities Maintenance management serves to protect the owners’ real estate investment… Read More »
Total Productive Maintenance (TPM) is a maintenance program which involves a newly defined concept for maintaining plants and equipment’s. TPM or total productive maintenance is a holistic approach to equipment maintenance that strives to achieve perfect operation and optimum production. Benefits of TPM include: No Small Stops or Slow Running Increase in overall equipment effectiveness.… Read More »
Maintenance management is now mandatory part of any facility management system. In fact maintenance management is not to repair broken equipment instead it is an approach to keep the equipment running at high capacity and produce quality output or efficiency at lowest cost possible. Long back the manufacturing and production work was done with relatively… Read More »
TABLE OF CONTENT Section Description 1. How to use the manual 2. General Description of Scope 3. Detailed Description of Scope 4. Asset Register 5. Operation & Maintenance instructions 6. Safety Procedures 7. Care of apparatus subject to seasonal use 8. Maintenance schedule 9. Maintenance check lists 10. Recommended spare parts 11. Test certificates 12.… Read More »
The scope of this method of statement covers all works associated with the protection, cleaning, lubricating, inspecting and reserving of equipment’s and materials, in suitable storage conditions according to Vendor’s and/ or Licenser`s recommendation. The duration of application is from the job site receipt date until materials and equipment are installed and commissioned, and the… Read More »