Fan Coil Unit (FCU) Operation and Preventive Maintenance Method Statement

Maintenance Fault Investigation & General Repairs to Refrigeration Air Conditioning & Ventilation Equipment

This document is intended to provide an outline to the work scope and details of the overall method for the maintenance works, it will be issued to clients upon request and held by the contract manager and relevant competent persons. It is not intended to be a step by step instruction…
Inergen Fire Suppression System Operation and Maintenance Procedure

Inergen Fire Suppression System Operation and Maintenance Procedure

The clean agent system typically installed for the fire protection shall be Total Flooding High Pressure type, utilizing a fixed pipe and nozzle distribution network. Fire Suppression System for the Protected area shall have two banks of the Inergen high-pressure storage cylinders, one bank selected as 'Main' and the other bank…
Rotary Drum Thickener Maintenance Procedure

Rotary Drum Thickener Maintenance Procedure

THIS EQUIPMENT MUST BE OPERATED AND MAINTAINED ONLY BY AUTHORIZED PERSONNEL WHO HAVE READ AND UNDERSTAND THE OPERATOR'S MANUAL, HAVE BEEN TRAINED IN ITS USE, AND FOLLOWING ANY AND ALL APPLICABLE SAFETY PROCEDURES. TO PREVENT SERIOUS INJURY OR DEATH: FOLLOW LOCK OUT PROCEDURES BEFORE SERVICING: LOCK OUT POWER WITH PADLOCK FOR…
Heat Exchanger Maintenance Tender & Contract Requirements – Annual Rate Contract

Heat Exchanger Maintenance Tender & Contract Requirements – Annual Rate Contract

Below are details which are helpful for preparing the tender and contract requirements for maintenance of heat exchangers also known as annual rate contract. Generally sealed tenders are invited from registered contractors with the client organization, who have already prequalified for the maintenance of heat exchangers. The scope of work includes…
Chilled Water Pump Operation and Maintenance Procedure

Yearly & Half Yearly Service Maintenance of Water Pumps

This maintenance procedure defines the method that will be used to ensure the pump motor and its accessories are service maintained as an integrated system correctly & regular preventive maintenance will help ensure longer pump life and more reliable operation. The procedure applies to all those buildings, villas, properties, and any…
Heat Exchanger Tubes Replacement Procedure

Heat Exchanger Tubes Replacement Procedure

Below is a precise mechanical method statement that describes in detail the removal of existing tubes and installation of new tubes for the Heat Exchangers. Procedure also outlines the method for replacement of existing tubes for Heat Exchanger. This procedure is one component of a complete replacement of tube work program.…
Copper Pipe Jointing Procedure For Making Flare Joints

Refrigerant Piping Installation Method Statement

This installation method statement is a brief outline of quality requirements for refrigerant piping system. It contains a work methodology and procedure, which is applicable with the specific work. The method also provides appropriate reference to all procurement, fabrication and construction activities and identifies quality related matters. All materials shall be…
Chilled Water Pump Operation and Maintenance Procedure

Chilled Water Pump Operation and Maintenance Procedure

Purpose of this documents is to establish a standard procedure for the proper operation and maintenance of chilled water pumps. This HVAC procedure will also serve as guideline for newly hired employees maintenance or facility management department who will be dealing with chilled water pump unit operation and maintenance activity. Scope…
HVAC Repair Service Method for Ducted Split Unit

HVAC Repair Service Method for Ducted Split Unit

The purpose of this standard hvac procedure is to establish standard guidelines for the preventive maintenance of ducted split Air-conditioning Unit. The documents will also serve as guideline for newly hired employee which will be dealing with this type of air conditioning unit. The scope of this standard covers all Ducted…