Chiller Condenser Coil Cleaning and Maintenance Procedure

Chiller Preventive Maintenance & Operation Method Statement

Purpose:  To establish a standard procedure for the proper operation and preventive maintenance of chiller unit. This will also serve as guideline for new employees and trainees who will be dealing with chiller unit operation and maintenance activity. Scope:  The scope of this standard covers all chiller related equipment's which are…
Diesel Generator Maintenance Repair & Troubleshooting

Diesel Generator Maintenance Repair & Troubleshooting

Inspections before Operation and Maintenance of Genset Check the insulated resistance: An insulated resistance usually results in the creepage of the alternator when it is below the regulated value and then brings on the security problems. The user should check the insulated resistance between the master and subordinate reels and the…
Preventive Maintenance Program and Procedure

Preventive Maintenance Procedure for Buildings & Projects

1. Purpose The purpose of this procedure is to ensure that all corrective and preventive maintenance activities are carried out as per applicable international best practices in order to achieve maximum customer satisfaction with minimum adverse impact on environment, health and safety of both employees and end users, operators and community.…
Copper Pipe Jointing Procedure For Making Flare Joints

Copper Pipe Jointing Procedure For Making Flare Joints

You can do copper pipe jointing using different methods like soldering, brazing, compression fittings, flaring, or crimping, but this page covers the flare joint method. Purpose of this method statement is to establish a standard procedure for the proper use of Flaring Tool. This method will also serve as guideline for…
Heat Exchanger Tubes Replacement Procedure

Heat Exchanger Tubes Replacement Procedure

Below is a precise mechanical method statement that describes in detail the removal of existing tubes and installation of new tubes for the Heat Exchangers. Procedure also outlines the method for replacement of existing tubes for Heat Exchanger. This procedure is one component of a complete replacement of tube work program.…
Air Conditioning Maintenance Priorities

HVAC Operation and Maintenance Tips

On this page you shall learn some basic tips for HVAC Operation and Maintenance. HVAC is abbreviation for Heating, Ventilation, and Air Conditioning Systems. Being interconnected and grouped together, this mechanical system provides thermal comfort and good air quality in an indoor space. The components of the hvac mechanical system include…
Copper Pipe Jointing Procedure For Making Flare Joints

Refrigerant Piping Installation Method Statement

This installation method statement is a brief outline of quality requirements for refrigerant piping system. It contains a work methodology and procedure, which is applicable with the specific work. The method also provides appropriate reference to all procurement, fabrication and construction activities and identifies quality related matters. All materials shall be…
Inergen Fire Suppression System Operation and Maintenance Procedure

Inergen Fire Suppression System Operation and Maintenance Procedure

The clean agent system typically installed for the fire protection shall be Total Flooding High Pressure type, utilizing a fixed pipe and nozzle distribution network. Fire Suppression System for the Protected area shall have two banks of the Inergen high-pressure storage cylinders, one bank selected as 'Main' and the other bank…